December 5, 2017

New Method for Preparing Liquid Mixtures in Manufacture of Latex Articles Using Electromagnetic Field Energy

The new method belongs to manufacturing in­gredient dispersions for latex mixtures, preparing liquid strong-filled latex mixtures, introducing reinforcing fillers into latex film articles.

The method is widely used for preparing water dispersions of vulcanizing and gelatinating ingredients in the manufacture of latex foam.

The method is effected using the electromagnetic field energy.

Compared to the known methods, it has certain advantages:

  • possibility of continuous production; total elimination of ball, vibrating and colloid mills from...

Production of coal-water slurry fuel with AVS

A high price of traditional fuel (gas and heating oil) encourages to search for new cheaper fuel to reduce the cost of thermal energy. One of the most promising new products is coal water slurry fuel – a mixture of coal particles (fraction 1 … 70 μm), water and reagent. It is characterized by a good heating value and a high degree of combustion.

Advantages of coal-water...

March 23, 2017

Drilling Fluid production with the GlobeCore AVS-150

GlobeCore’s engineers have recently tested the New AVS-150 Vortex Layer Device’s ability to produce High Quality Drilling Fluids.

A special drilling fluid is always used when drilling a well for oil or natural gas. The drilling fluid is usually made immediately before the extraction of the oil or natural gas. The use of a quality drilling...

March 13, 2017

Decontamination of Wastewater

Decontamination of Wastewater. Protection of drinking water, as well as surface and underground water bodies from pollution is a serious problem of humanity, because the need for clean drinking water is always growing.

Water bodies contain naturally occurring impurities along with chemical pollutants of various compositions (pesticides, phenols, petroleum products, heavy metal salts, nitro compounds, etc.), which enter water bodies with insufficiently treated industrial and domestic wastewater....

Improving the efficiency of industrial wastewater treatment in the electromagnetic nano-mill

The environmental protection measures include saving the planet’s water resources and management of used resources which occupy large areas. Especially important is the treatment or industrial wastewater, among which the wastewater of chemical, engineering, food, instrument, petrochemical and other industries poses the greatest danger to the environment.

Wastewater of these industries varies in amounts, composition and concentration of contaminants and thus requires the application of reliable and...

Ion Exchange in Electroplating Wastewater Treatment

The process of ion exchange has found practical use in wastewater treatment and water preparation systems, specifically for demineralization, desalination, correction of the chemical composition of water, removal of toxic or valuable substances in processing natural or industrial wastewater.

Despite the abundance of the chemical properties of electroplating wastewater contaminants, both organic and inorganic, the specific chemical interaction of ions, which exchange ionites (forming complex functional groups,...

October 12, 2016

Equipment for Mixing of Paints

The need for mixing different paints arises when one needs to perform some paintwork, but is not satisfied with standard colors available in the market.  In addition, mixed colors are more subtle and convincing.

Let us consider the basic techniques used in paints mixing, as well as the equipment used for this purpose.

There are the so-called basic colors, which cannot be obtained by mixing others....

GlobeCore AVS-100 magnetic mill


Intensive dispersion of solid material with simultaneous particle activation can be applied in paint production and laquer production. Iron oxide pigments, for instance, can be dispersed to the size less than 20 micron in 15-60 seconds in the AVS electromagnetic mill; in a ball drum, the same process takes several hours.

Paint Production in AVS

The paint production industry uses predominantly three types of equipment: bead mills, ball drums and ring roller mills....

The Use of Vortex Layer Devices for Decontamination of Liquid Pig Manure

One of the major problems of livestock industry is the accumulation of large amounts of liquid manure.  Manure processing and subsequent disposal technology depends on the pig farm cleaning methods.  Nowadays, water wash is most often used in practice, which is characterized by the occurrence of low-concentration manure effluent, the volume of which is 4-5 times more than the volume of the initial material. Processing costs also grow...

April 15, 2016

Using AVS to intensity biogas production

The range of Vortex layer device application is quite wide, the unit is efficient for ultrafine grinding, dispersion and mixing and intensification of various chemical and physical reactions.

While researching the practical applications of the Vortex layer device, it proved to be beneficial in the process of biogas production, beside other uses.

As was described in previous articles, AVS is often used as a reactor. Due to the electromagnetic effect...

April 15, 2016

Application of the vortex layer device for seed pretreatment

Future cereal crop seed productivity is influenced by many factors, including external such external ones as habitation and growth environment and their biological characteristics. Each factor has different influence in different periods of development, and it is often impossible to take all into account. However, modern agricultural science has a range of techniques to reduce the influence of the negative factors and augment the positive ones to obtain...

Grinding (Crushing) of Fluoroplastics

Fluoroplastic – is the general name of fluorine-containing polymers. According to the existing classification, substances of this class include:

  • polytetrafluoroethylene;
  • polytrifluorochloroethylene;
  • polyvinylidene fluoride;
  • copolymers of fluorinated ethylene.

Fluoroplastics have an excellent chemical inertness towards corrosive media. The exceptions are molten alkali metals and chlorine trifluoride.

Fields of Application of Fluoroplastics

Due to its physical and chemical properties fluoroplastics are widely used in industry, medicine, transportation, energetics, and also for solving military tasks.

Chemical inertness towards...

April 15, 2016

Vegetable oil degumming: equipment choice

Vegetable oil degumming is the removal of phospholipids from the crude product. Those are fat-like substances, highly valuable biologically. Actual content of phospholipids in vegetable oil varies from 0.2 to 4.5% and depends on the specific substance and the method of oil production.

Immediately after oil extraction, phospholipids are solved in the oil, but can lose that solubility in storage and precipitate, clouding the product.


April 15, 2016

Vortex layer device in production of unfired anhydrite binding material

Plaster industry now makes products based on plaster binding materials. In practice such materials are made by low-temperature firing of natural material to calcium sulfate hemihydrate. At the same time, unfired plaster binding materials and gypsum cement are not often used. The main factors limiting their use is the need for lengthy milling (for unfired binding material) and high energy costs (for gypsum cement).

Recently, GlobeCore has achieved...

April 15, 2016

Vegetable oil filtration

Vegetable oil is a made from seed feedstock by pressing or extraction. Combined method, where pressing is used initially, followed by extraction, is somewhat less common.

The process of pressing the oil involves subjecting the prepared seeds to high pressure. Extraction is based on diffusion and involves extraction of oil by extraction solvents (hexane).

Extraction of oil is preceded by cleaning the seeds, peeling and pulverization,...

April 15, 2016

GlobeCore magnetic strainers to capture metal in food production

One of the possible applications of vortex layer generators is the processing of liquid phase and heterogenic systems. This equipment allows to intensify processes in various industries: food production, chemical, microbiological, petrochemical, etc.

The principle of vortex layer device operation is based on chaotic motion of ferromagnetic elements in a rotating magnetic field. A layer forms inside the device’s active chamber, called the vortex layer. In this...

April 15, 2016

Using the vortex layer devices to improve marine fuels

The first mention of adding water in internal combustion engines dates back to the end of the 19th century. Many studies have been performed since then, which indicate that adding water to fuel is, in fact, possible and leads to the following:

  1. Intensification of fuel combustion;
  2. Reduction of incomplete combustion product and nitrogen oxides in engine exhaust.

The quality of water used to make water-fuel emulsions has...

обновлено: April 15, 2016 автором: oksana