December 03, 2021
Preliminary processing of liquid organic waste in vortex layer devices
In recent years, society’s attention has been increasingly drawn to solving two inextricably linked problems — preventing the depletion of natural resources and protecting the environment from pollution. The rapid consumption of natural fuel reserves and the limited construction of hydroelectric and nuclear power plants have aroused interest in the use of renewable energy sources,Read More
March 18, 2021
Processing of Peat and Sapropel into Humates
Processing of peat and sapropel is used to obtain any new product with required properties. In particular, so-called humates or humic fertilizers, are obtained from this raw material. What are humates (humic fertilizers) They use humic fertilizers to stimulate plant growth. At its core, humates are organic substances. The processing of peat, sapropel, brown coalRead More
March 18, 2021
Microcement: production on vortex layer devices AVS (nanocement)
Microcement is a material used to strengthen structures made of stone and concrete in order to increase their strength and water resistance. In fact microcement is crushed clinker with additives. Depending on the original components, there are different types (brands). Also the brand is determined by the particle size distribution. With the addition of waterRead More
March 18, 2021
Increase of cement activity
Currently, the worldwide tendency is such that cements with a high content (more than 35%) mineral additives are replacing traditional pure Portland cement, such as blast furnace slag, silica fume, fly ash, limestone flour, natural and artificial pozzolana. The expediency of increasing the share of mineral additives in cements does not raise doubts for cementRead More
class="no-img"
February 19, 2021
Electromagnetic nano-mill for decontamination of liquid pig and cow manure
Livestock production generates large amounts of liquid manure, which may contain a variety of pathogenic microorganisms and helminth eggs. If such manure falls into the environment without preliminary treatment, it will cause epidemics among the local population. If there is no prompt response, the epidemics can spread to the neighboring towns and villages. The microorganismsRead More
November 06, 2020
Peat processing by Vortex Layer System AVS-150. Peat. Humates. Sapropel.
THE INFLUENCE OF DISPERSION ON THE COMPONENT COMPOSITION OF PEAT, HUMATES, SAPROPEL Increasing of earth fertility in agricultural sphere is an essential condition for agronomy, it increases yield, improves soil and has important environmental value. For its part, there is no worthy alternative of peat replacement for large-scale improvement of agrotechnical nature of soil.Read More
December 11, 2019
Manure treatment in a small pig farm
Manure treatment in a small pig farm The manure processing on a small livestock farm is very differently equipped, and uses different materials, etc. The traditional system for manure processing is simply not available to small farms due to small amounts of manure. Therefore, manure is often taken out manually and folded outside without anyRead More
October 28, 2019
Activation of Catalysts for Carbon Nanomaterial Production
The most important stage of preparing heterogeneous catalysts for carbon nanomaterial (CNM) is their activation, which is understood as a complex of physical influence on the catalytic material, which allows to significantly increase the efficiency of nanostructure synthesis. This can be achieved by researching mechanical (dispersion) and physical (electromagnetic and ultrasonic) activation methods. One ofRead More
August 05, 2019
Cement Grinding in Ball Mills and Vortex Layer Devices
Cement and concrete are the second most used substances in the world, after water. On average, the per capita consumption of cement is one ton. This material is widely used as a binder in the production of concrete, reinforced concrete and various construction mixes. The demand for cement in construction of new buildings, repairs andRead More
June 18, 2019
Vortex Layer Devices in Gold Production
Gold is used in several fields: as part of national reserves; in medicine (dentistry, pharmaceuticals and cosmetology). In this case gold is used in implants, medicines and cosmetics. The amount of gold used in this field is relatively small and remains below 2% of the total demand; electronics (information technologies and telecommunications). In this fieldRead More
June 18, 2019
The Forces in the Vortex Layer Device Chamber Which Impact Biodiesel Production
The action, motion and energy of the ferromagnetic particles are the decisive influences on the methanolysis process. In turn, these factors are defined by the shape of the particles, their diameter, the ratio of length to diameter, the amount of particles in the chamber and a few other things. The amount of particles in theRead More
June 18, 2019
Vortex Layer Device Design Features
Operation of the rotating magnetic field devices is based on one of the most characteristic features of multiphase currents, that is, generation of a rotating magnetic field, which serves as a driving force for the intensive chaotic motion of ferromagnetic particles. The particles carry and transform the energy of the field. The most common practicalRead More
March 13, 2017
Wastewater Treatment with Vortex Layer Device
Wastewater Treatment. Over the years, there has been a growing anthropogenic impact on water resources. The main reason is the careless attitude of man to nature, resulting in increasing concentration of pollutants in the water every year, unauthorized dumping of washing water from ships, as well as accidental discharges from industrial wastewater from plants. DuringRead More
March 13, 2017
Mechanical Treatment of Wastewater to Remove Petroleum
Mechanical Treatment of Wastewater. Among the worst environmental problems is a widespread petroleum pollution of water bodies, coastal areas and soil, due to its increased production, transportation and refining. Statistics estimate 2% of oil losses during transportation. The losses cannot be avoided during storage of fuels and lubricants on tank farms and oil processing enterprises,Read More
March 13, 2017
Methods for Wastewater Treatment
Methods for Wastewater Treatment. The industrial enterprises cause environmental pollution with exhaust gases, wastewater and solid industrial waste. The bulk of waste of the I-IV class is the combustion residue, animal and plant waste as well as industrial wastewater resulting from wastewater treatment. The large amounts of such waste are due to the outdated technologiesRead More
March 13, 2017
Wastewater Treatment Unit to Remove Hexavalent Chromium and Other Heavy Metals
Wastewater Treatment Unit. The process line for wastewater treatment from chromium, lead, nickel, iron and other heavy metals can be equipped with the AVS-100 (150) electromagnetic nano-mill by GlobeCore. It significantly reduces reagent consumption, provides better cleaning and make the process continuous. The main feature of the electromagnetic nano-mill is the intensive mixing of materialsRead More
March 13, 2017
Industrial Wastewater Treatment Using an Alternating Electromagnetic Field
Industrial Wastewater Treatment. Environmental pollution is a global problem requiring effective and integrated solutions. An important part of protecting the environment is keeping the water resources pure and clean, when they are contaminated with heavy metals, acids, alkalis and other industrial wastes. The existing wastewater treatment technologies are not always reliable and efficient, requiring theRead More
March 13, 2017
Wastewater Treatment Based on Electromagnetic Nano-mill
Environmental problems are vitally important and require complex approaches. The most urgent task is improving the water resources of the planet which are polluted by industrial and agricultural waste. This problem is solved by wastewater treatment systems. Currently wastewater treatment mainly uses ion exchange, reagent and electrochemical methods, which are designed to deal with suchRead More
March 13, 2017
Improving the Cracking Resistance of Concrete Using Electromagnetic Nano-mill
For more than 100 years, scientists around the world explored the cracking resistance of concrete. The central scientific problem of this research is to establish the patterns of crack development and their effect on the bearing capacity of the element. There are two types of cracks typical for reinforced concrete structures: The first type ofRead More
class="no-img"
January 06, 2017
Using Biosorbents to Remove Oil From Water
Remove Oil From Water. Dumping of insufficiently treated household and industrial wastewater contaminates water, poisons water bodies and destroys ecosystems. Among the substances contaminating oceans, seas, lakes and rivers of the planet, various oil products hold a leading position. The amount of oil products dumped into the ocean, but different accounts, varies from 5 toRead More
class="no-img"
January 06, 2017
Purification of Household Wastewater
Household wastewater goes into sewage from kitchens, bathrooms etc. Such wastewater can be treated using mechanical and biological methods. Purification of wastewater is a complex multistage process, which begins in the input chamber. Then the water is filtered mechanically to remove garbage etc. The liquid phase is separated from the solid phase, by using settlingRead More
class="no-img"
January 06, 2017
Chemical Purification of Wastewater
Chemical Purification of Wastewater. Water going into the sewage system must be processed to remove heavy metals and other hazardous contaminants. This purification requires a complex of measures. Wastewater can be classified by origin: industrial; household; precipitation (snow, ice etc). Chemical purification of wastewater implies the use of special reagents which react the contaminants. SuchRead More
January 06, 2017
Methods of Dry Construction Mix Modification
The high quality of the modern construction mixes is impossible without using special modifying additives. They allow to adjust the properties of the material, making solutions with the required qualities for use in any (even extreme) conditions. A relatively large amount of such additives is available in the market today. These are mostly surfactants, electrolytes,Read More
class="no-img"
January 06, 2017
Modern Methods of Wastewater Treatment
When selecting methods and processes for treatment of industrial wastewater, several factors must be considered, such as the amount and nature of waste, concentration and type of contaminants, requirements treatment results as well as the possibility of using this water in water supply systems. In recent years, chemical, ion-exchange and electrochemical methods have come intoRead More
class="no-img"
January 06, 2017
Wastewater treatment technology
Development of wasteless technology is an important measure to protect the environment from anthropogenic loads by separating contaminants from water, and possibly to recycle the contaminants for use in technology processes. This can be achieved by using modern efficient technologies. However, wastewater has several types of contaminants and so using only technology process in realRead More
class="no-img"
January 06, 2017
Intensification of Wastewater Treatment in Food Production
Intensification of Wastewater Treatment. Treatment of wastewater, including that in food production industry, is a serious problem. Today, industrial processing of agricultural materials without consideration of environmental concerns causes contamination not only of the atmosphere and water bodies, but also the soil, ruining its fertility. Sugar, alcohol, yeast and meat processing facilities are often surroundedRead More
class="no-img"
January 06, 2017
Neutralization of Wastewater
Neutralization of wastewater is required before releasing it into water bodies or reuse in various technology processes. Wastewater containing acids or alkali must be neutralized. Water with pH of 6.5 – 8.5 are considered neutral. Neutralization is required where pH is below 6.5 and above 8.5. Practically, the highest danger is posed by acidic wastewaterRead More
class="no-img"
January 06, 2017
Removal of Phosphorus From Wastewater: a Review of Methods
Removal of Phosphorus From Wastewater. Wastewater generated by the industry and agriculture in many cases contains large amounts of ammonium and phosphorus. Insufficient removal of these from wastewater is a source of contamination of ground and surface water and causes eutrophication of water bodies. Biogenic elements cause proliferation of cyanobacteria. Excessive activity of algae degradesRead More
class="no-img"
January 06, 2017
Livestock Farm Wastewater Treatment
Farm Wastewater Treatment. The degree of contamination of wastewater is characterized by the amount of mineral, organic and bacterial materials solved or unsolved in the water. Wastewater is treated by mechanical, chemical, physical or biological methods. Biological processes involve oxidation of organic substances in waste water in the form of suspensions, colloids and solutions byRead More
class="no-img"
January 06, 2017
Biochemical Treatment of Wastewater: Anaerobic Process
Biochemical Treatment of Wastewater. Anaerobic methods involve treatment of wastewater without access to oxygen. Instead, methane fermentation is used. The advantage of this method is the high level of converting contaminants with the formation of biogas byproduct. Wastewater contaminated by nitrogen compounds are converted in the process of denitrification by microbes (such as Paracoccus denitrsficans)Read More
class="no-img"
January 06, 2017
Wastewater Treatment: Aerobic Process
Aerobic process are based on the use of microbes which require constant supply of oxygen and the temperature of 20-40°С. Disruption of oxygen supply and temperature changes the composition and number of microbes. Purification of wastewater in aerobic conditions is performed by biofilters or by cultivation of microbes in biological sludge, in which biocenosis consistsRead More
class="no-img"
January 06, 2017
Wastewater Treatment: Absorption Fields, Biofilters and Aerotanks
Wastewater Treatment:. Aerobic wastewater treatment methods is classified according to the type of reservoir where the contaminants are oxidized. The reservoirs can be such structures as absorption fields, ponds, biofilters and aerotanks. The aerobic oxidation (mineralization) occurs in biological ponds due to the microbes, algae and higher plants. The small depth, no currents, abundance ofRead More
class="no-img"
January 06, 2017
Industrial Wastewater Treatment
The volume of toxic waste has been growing in recent years, and the environment cannot cope on its own. Large amounts of contaminants enter the environment with wastewater, including toxic ions of heavy metals. Reagents are used to purify wastewater and decontaminate concentrated solutions (electrolytes etc), neutralizing them and causing sedimentation of heavy metals withRead More
class="no-img"
January 06, 2017
Compact Wastewater Treatment Facilities
The modern wastewater treatment infrastructure in cities is in many cases in poor condition, while the volume of wastewater and the concentration of contaminants keep growing. The quality of wastewater treatment may fall short of standards due to unsatisfactory operation of the aging treatment plants. Besides, new sewage lines must be built through residential areaRead More
class="no-img"
January 06, 2017
Ion Exchange in Electroplating Wastewater Treatment Processes
The problem of contamination of water bodies with biogenic elements and protection of the environment is essential. The main source of contamination, which worsens water quality and disrupts ecosystems is the release of insufficiently treated wastewater. Municipal treatment facilities, where biological treatment of water is performed through the traditional arrangement of aerotank and a secondaryRead More
class="no-img"
January 06, 2017
Treatment of Agricultural Wastewater with Biotechnology
Treatment of agricultural wastewater usually involves physical, chemical and biological processes. A typical treatment system includes primary, secondary and, in some cases, tertiary purification stages. The principle of operation of most one or two stage treatment plants is based on using physical (mechanical) effects, and therefore the variety of the facilities does not differ muchRead More
class="no-img"
January 06, 2017
Traditional and Alternative Methods of Household Wastewater Treatment
Methods of Wastewater Treatment. Among the traditional wastewater purification technologies, one of the most common is aerotank treatment. Those are, as a rule, rectangular reactors with many chambers, which contain high concentrations of aerobic microbes in suspended floccules (biological sludge) and are equipped with a system of continuous aeration and recirculation of sludge. Aerotanks withRead More
class="no-img"
November 02, 2016
Electromagnetic Intensifier for WasteWater Treatment
Electromagnetic Intensifier for WASTEWATER TREATMENT SYSTEMS WASTEWATER TREATMENT SYSTEMS | VORTEX LAYER DEVICE AVS-150 Treatment of industrial waste water is one of the most important stages of any production process. Besides, environmental safety is not only a matter of preference, but a requirement in our times. Advantages increasing reaction speed in 1.5-2 times reagent and energyRead More
October 05, 2016
QUARTZ SAND PULVERIZATION
Quartz and quartz sand are natural materials. There is a lot of quartz in the Earth’s crust, and the material has several important properties, such as high mechanical strength and adsorption capability. Quartz can be a part of other minerals, bringing its content in the Earth’s crust to over 60%. It is mostly used in theRead More
August 12, 2016
Water-coal slurry as an alternative to natural gas and heavy fuel oil
Using inexpensive coal slack and the Vortex layer device, one can make fuel not inferior in terms of heat capacity to heavy fuel oil and natural gas, but a lot more economical: water-coal slurry or liquid fuel. What is «water-coal slurry»? Water-coal slurry (abbreviated as CWS, CWSM, CWM) is a mix of coal, water andRead More
August 12, 2016
Mayonnaise and its production in AVS
The AVS-100 vortex layer device is used successfully in food production to make mayonnaise and various sauces. Using the AVS reduces the complexity of the technology process and its duration, while improving the product’s dispersion. The device intensifies the process by eliminating some of the stages and reducing the cost of the product, improving itsRead More
August 12, 2016
Modification of gasoline by water in the vortex layer generator
The vortex layer generator can also be used successfully in fuel production, specifically for modification of liquid hydrocarbon fluids by water and for production of motor and heating fuel with improved performance and environmental properties. The method of modified fuel production involves missing of the hydrocarbon components with water in a rotating electromagnetic field ofRead More
August 12, 2016
Nanotechnologies in concrete production
The Vortex Layer device is a versatile device, applicable in many industries. The device is of interest to many scientists, theoretical and practical, since it intensifies various chemical and physical processes. The analysis of factors of the vortex layer allows to estimate the action of the vortex layer on certain chemical reactions. Due to electrolysisRead More
class="no-img"
May 13, 2016
Quartz sand pulverization
Quartz is a natural mineral. It is widely availalbe and has several important properties: high strength, resistance to destruction and high sorption capability. Quartz can be a part of other minerals, making its content in the planet’s crust above 60%. It is mostly used as sand in industrial applications. Fine pulverization of minerals allows toRead More
April 15, 2016
Automatic reagent feeder for vortex layer device waste water purification systems
GlobeCore develops, manufactures and installs waste water treatment systems based on the vortex layer devices. The main feature of these devices is the comprehensive effect on the processed materials, including intensive mixing and dispersion, acoustic and electromagnetic influence, friction, high local pressures, electrolysis etc. The above increase the efficiency of waste water treatment: reduces energy costs,Read More
April 15, 2016
Automatic addition of ferromagnetic particles into the active chamber of the vortex layer device
The electromagnetic vortex layer devices were first developed in 1960s. In these devices, a complex interaction between the ferromagnetic particles, liquid and the processed material occurs, accelerating the processes of mixing and pulverization. Besides, vortex layer devices can successfully be used as reactors. GlobeCore manufactures AVS-100 and AVS-150 vortex layer devices. In essence, the equipment isRead More
class="no-img"
April 15, 2016
Advantages of GlobeCore Magnetic Mills in Processing of Diamonds
Diamonds that are mined from Earth’s interior can be divided into two groups: industrial and jewelry. Industrial diamonds can be of high and low quality. High quality industrial diamonds are used in drill bits without preliminary processing. Low quality industrial diamonds require some manipulations to be done that can split the diamonds according to theirRead More
April 15, 2016
Application of the vortex layer device for seed pretreatment
Future cereal crop seed productivity is influenced by many factors, including external such external ones as habitation and growth environment and their biological characteristics. Each factor has different influence in different periods of development, and it is often impossible to take all into account. However, modern agricultural science has a range of techniques to reduceRead More
April 15, 2016
Advantages of GlobeCore Vortex Layer Device (Magnetic Mill) for Wastewater Cleaning
Despite of all the efforts to achieve progress in improving the environment is not yet possible. Therefore, it is urgent to find a new high-performance solution for treating sewage of industrial enterprises. Existing wastewater treatments are not always able to remove all hazardous chemicals. GlobeCore specialists conducted a number of studies confirming that – usingRead More
April 15, 2016
Vortex Layer Device(Magnetic Mill) AVS Treatment of Containing Cyanide Wastewater from Galvanic Plant
A huge amount of water is consumed in electroplating workshops. Most of the volume is used to prepare and adjust electrolyte and for rinsing products after processing. Depending on the type of contaminants the wastewater from electroplating plants is divided into three groups: The acid-alkaline water. It contains acid (sulfuric, hydrochloric, nitric, hydrofluoric), alkali andRead More
April 12, 2016
Regrinding wood flour
Wood flour is a powder consisting of particles the size of hundred microns, and obtained by pulverizing sawdust. The area of application of wood flour is rather wide This material is used in the preparation of phenolic plastics, alkyd linoleum, filter elements and explosives. In smaller amounts wood flour is used in the manufacture ofRead More
April 12, 2016
Vortex layer device for fine-dispersed chalk production. Grinding process
Chalk regrinding in the vortex layer device These devices – are a complex interaction between the particles, that are a result of rotating electromagnetic field, fluid and processed material. The process of grinding and mixing is speeded up. The grinding effect is determined by the nature of the movement of ferromagnetic elements in the workingRead More
March 14, 2016
AVS in construction material production
The use of AVS in production of various construction materials, such as nano-modified concrete, finely dispersed cement, extra-strong silex bricks etc, is very promising. The vortex layer device, or the AVS-100, has been tested in various industrial facilities. Practice shows that AVS efficiently replaces such devices as ball, vibration, hammer mills, various pulverizers and dispersers.Read More
February 15, 2016
AVS Application in rubber production processes
A daily sediment of kaolin suspension prepared in the AVS in 5 minutes is only 5%, whereas a similar suspension, prepared in a ball mill in a four hour process, separates completely. A suspension of carbon black does not separate after a one minute processing in the AVS. At the same time, a similar suspensionRead More
February 11, 2016
AVS in waste water treatment
Treatment of industrial waste water is one of the most important stages of any production process. Besides, environmental safety is not only a matter of preference, but a requirement in our times. In this page you can find information on industrial applications of the vortex layer device in waste water treatment and the existing processRead More
February 03, 2016